PP (Polypropylene)

VARIANTS

  • PP with fillers (up to 50%)
    • tale
    • calcium carbonate
  • PP-Regenerate Material

 

TYPEN

  • PP-H (Homopolymer)
    • permanent-heat resistant
    • permanent-heat resistance also at high temperatures
    • food conformity EU10/2011 + FDA
    • temperature range: 0° C – 100° C
  • PP-C (Block Co-polymer)
    • increased impact strength compared to PP-H also at low temperature
    • reduced stress-cracking sensitivity
    • temperature range: -20° C – 80° C
  • PP-R (Random-Co-polymer)
    • high impact strength as PP-H also at low temperature
    • high flexibility
    • temperature range: -20° C – 80° C
  • PP-EL (electrically conductive)
    • electrical conductivity on request 103 – 107
    • high permanent-heat resistance 5° C – 100° C

AREAS OF APPLICATION

  • thermoforming
  • screen printing
  • offset printing
  • digital printing
  • mechanical processing
  • welding

ADDITIONAL EQUIPMENT

  • UV stabilisation
  • hardly inflammable
  • with mineral fillers
  • corona treatment

PROPERTIES

Better mechanical properties
(stiffness, hardness and strength) than PE, but lower notch impact strength.

Resistant to alcohol, weak organic acids and alkali solutions.

PP-PRODUCTION RANGE

THICKNESSES AND WIDTHS

  • sheet thicknesses: from 0.8 – 6.0 mm
  • roll thicknesses: from 0.6 – 2.5 mm
  • sheet widths: from 380 – 1,500 mm
  • roll widths: from 380 – 1,500 mm
  • sheet lengths: from 400 – 3,000 mm
  • mono-extrusion, co-extrusion, blends, finishing and cuts.

COLOURS OF SHEETS AND FOILS

  • natural, black, white and coloured according to RAL, Pantone, HKS or sample pattern

SURFACES

  • machine-finished on both sides
  • various grains also on both sides available
  • decors

CORONA TREATMENT

  • on one or both sides

PROTECTIVE FILMS

  • on one or both sides